Structural Screws & Bolts

$ 421.99
Price just updated Price updated 4 days ago
Strong-Drive SDWH27600G 6" Timber Hex HDG Structural Screw

Simpson Strong-Tie SDWH27600G 6" Timber Hex HDG Structural Screw 350ct

35 lb (15.876 kg)

$ 785.99
Price just updated Price updated 5 days ago
5/8"-11x2 1/4"

Since 1946 Jet Fitting & Supply has been the name called upon by manufacaturers, assemblers and 'Makers'. Jet Fitting delivers solutions to a well-diversified group of industries including aerospace, commercial, construction, electronics, marine, military, telecommunications, transportation, Makers and DIY'ers. Trust ...

- The bearing surface shall be flat and washer-faced, and the point is chamfered

- A heavy hex bolt made of alloy steel

- Used in structural steel joints in heavy construction when greater yield and tensile strengths

- than those of an A325 bolt are required

$ 99.64
Price just updated Price updated 5 days ago
Simpson Strong Tie SSFHSD112S1016 FHSD112S1016#10 by 1-1/2" Flat Head Self-Drilling 410 Stainless Steel Screw

Quikdrive flat head self-drive screw is commonly used in wood to cold-formed steel applications (recommended thicknesses: 3/16-inch).

- Quantity: 1, 000-pieces

- #2 square drive (Driver bit in each box; replacement bit model BIT2S)

- Type 410 stainless-steel screw has nibs under the head for easy countersinking

- 2 drill point; flat head

- Curved collation

10.4'' x 4'' x 14.2''
26.4 cm x 10.2 cm x 36.1 cm

$ 100.52
Price just updated Price updated 5 days ago
GRK RSS388HP RSS HandyPak 3/8 by 8-Inch Structural Screws

Included with (50) GRK Fasteners 12287 3/8" x 8" T-40 RSS Rugged Structural Screws. The RSS Fasteners are Ideal for Carrying Beam, Playground Equipment, Ledger Board, Deck Posts, and Stair Rails. AC257 Treated Lumber Approved (IBC/IRC Code Compliant ESR #2442). ...

- Lag Screw Alternative

- Self-Tapping W-cut thread design

- Built in washer head

- Zip-Tip

- Patented Climatek coating

13'' x 4'' x 4''
33 cm x 10.2 cm x 10.2 cm

5.13 lb (2.327 kg)

$ 63.65
Price just updated Price updated 5 days ago
GRK PHERSS516212HP RSS SS HandyPak 5/16 by 2-1/2-Inch Structural Screws

- Lag Screw Alternative

- Use GRK Bit T-30

- PHEINOX Stainless Steel with limited lifetime warranty

- Self-Tapping W-cut thread design

- CEE Thread design in sizes 3-1/8-Inch and larger

2.61 lb (1.184 kg)

$ 138.09
Price just updated Price updated 4 days ago
4.0 / 5 (1) (1)
GRK RSS3810HP RSS HandyPak 3/8 by 10-Inch Structural Screws

Included with (50) GRK Fasteners 12293 3/8" x 10" T-40 RSS Rugged Structural Screws. The RSS Fasteners are Ideal for Carrying Beam, Playground Equipment, Ledger Board, Deck Posts, and Stair Rails. AC257 Treated Lumber Approved (IBC/IRC Code Compliant ESR #2442). ...

- Lag Screw Alternative

- Self-Tapping W-cut thread design

- Built in washer head

- Zip-Tip

- Patented Climatek coating

14'' x 4'' x 4''
35.6 cm x 10.2 cm x 10.2 cm

5.7 lb (2.585 kg)

$ 16.99
Price just updated Price updated 5 days ago
5.0 / 5 (3) (3)
Simpson Strong Tie 10D5HDG Structural Connector 3-Inch by .148-Inch 9-Gauge Smooth Shank Hot-Dip Galvanized Nails

These Simpson Structural Connectors are coated fasteners with a medium level of corrosion protection, making them suitable for use in some exterior and corrosive environments and with some preservative-treated woods. For higher corrosion exposure, use stainless steel fasteners.

- Approximate 50 nails per pound

- 5/16-inch head diameter

- Structural connector

3.75'' x 6'' x 5.5''
9.5 cm x 15.2 cm x 14 cm

5 lb (2.268 kg)

New
$ 9.49
Price just updated Price updated 15 days ago
Simpson Strong Tie SD8X1.25-R R #8 by 1.25 Strong Drive Screw

The wafer-head screw is great for general wood-to-wood fastening where a low-profile head is needed.

- Quantity: 100-pieces

- Serrated threads for easier driving

- Deep phillips drive resists cam-out

- Wafer head

- Primary use: wood to wood

3'' x 2'' x 4''
7.6 cm x 5.1 cm x 10.2 cm

0.6 lb (0.272 kg)

New
$ 150.40
Price just updated Price updated 15 days ago
Simpson Strong Tie TB1460S 6mm by 60mm #14 by 2-3/8" Yellow Zinc Screw

This structural screw is used for fastening wood to Hot-Rolled steel (maximum recommended thickness: 5/16-inch). great for installing wood truck beds.

- Quantity: 750-pieces

- Mm (#14) wood-to-steel/aluminum

- Nibs under the head for easier countersinking

- Yellow zinc Dichromate coating

- Flat head, straight collation

10.4'' x 4'' x 14.2''
26.4 cm x 10.2 cm x 36.1 cm

17.3 lb (7.847 kg)

$ 14.36
Price just updated Price updated 5 days ago
Uxcell a15123100ux0344 M3 x 40mm Phillips Head Stainless Steel Countersunk Bolts Screws

1. 304 stainless steel material countersunk Phillips socket flat head screws M3 x 40mm. Total length: 40mm/1. 6"(L); head diameter): 5mm/0. 2"; head height(k): 2mm/0. 08";thread diameter): M3/3mm; Phillips size: 3mm/0. 12".

- Thread diameter): M3/3mm; Philips size: 3mm/0.12"

- Product Name: countersunk bolts; thread size: M3 x 38mm/0.12" x 1.5"(D*l); weight: 87G

- Head style: flat head; material: 304 stainless steel; Package Content: 50(+/-2%) Pcs x countersunk bolts

- Drive Type: Philips; main Color: Silver tone; thread Pitch: 0.5mm/0.02"

- Total length: 40mm/1.6"(L); head diameter): 5mm/0.2"; head height(k): 2mm/0.08"

1.57'' x 0.2'' x 0.12''
4 cm x 0.5 cm x 0.3 cm

0.19 lb (0.086 kg)

$ 49.99
Price just updated Price updated 5 days ago
5.0 / 5 (1) (1)
GRK RSS102-5 RSS ProPak 10 by 2-Inch Structural Screws

GRK's RSSTM Rugged Structural Screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller ...

- Lag Screw Alternative

- Self-Tapping W-cut thread design

- Use GRK Bit T-25

- Zip-Tip

- Patented Climatek coating

3.52 lb (1.597 kg)

Structural Screws & Bolts under $10, Structural Screws & Bolts under $20, Structural Screws & Bolts under $50, Structural Screws & Bolts under $100, Structural Screws & Bolts under $200